This tutorial is automatically generated from the file trunk/pde/test/tutorials/TestSolvingLinearPdesTutorial.hpp at revision r20767. Note that the code is given in full at the bottom of the page.
Examples showing how to solve linear elliptic and parabolic PDEs
In this tutorial we show how Chaste can be used to solve linear PDEs. The first test uses the SimpleLinearEllipticSolver to solve a linear elliptic PDE, and the second test uses the SimpleLinearParabolicSolver to solve a parabolic time-dependent linear PDE.
The following header files need to be included. First we include the header needed to define this class as a test suite
#include <cxxtest/TestSuite.h>
On some systems (with Boost 1.33.1 and PETSc 2.2) there is a clash between Boost Ublas includes and PETSc. This can be resolved by making sure that Chaste's interface to the Ublas library is included as early as possible.
#include "UblasIncludes.hpp"
This is the class that is needed to solve a linear elliptic PDE.
#include "SimpleLinearEllipticSolver.hpp"
This is the class that is needed to solve a linear parabolic PDE.
#include "SimpleLinearParabolicSolver.hpp"
This is a parabolic PDE, one of the PDEs we will solve.
#include "HeatEquationWithSourceTerm.hpp"
We will also solve this PDE.
#include "SimplePoissonEquation.hpp"
This is needed to read mesh datafiles of the 'Triangles' format.
#include "TrianglesMeshReader.hpp"
This class represents the mesh internally.
#include "TetrahedralMesh.hpp"
These are used to specify boundary conditions for the PDEs.
#include "BoundaryConditionsContainer.hpp"
#include "ConstBoundaryCondition.hpp"
This class helps us deal with output files.
#include "OutputFileHandler.hpp"
The following header must be included in every test that uses PETSc. Note that it cannot be included in the source code.
#include "PetscSetupAndFinalize.hpp"
Test 1: Solving a linear elliptic PDE
Here, we solve the PDE: div(D grad u) + u + x2+y2 = 0, in 2D, where D is the diffusion tensor (2 0; 0 1) (ie D11=2, D12=D21=0, D22=1), on a square domain, with boundary conditions u=0 on x=0 or y=0, and (D grad u).n = 0 on x=1 and y=1, where n is the surface normal.
We need to create a class representing the PDE we want to solve, which will be passed into the solver. The PDE we are solving is of the type AbstractLinearEllipticPde, which is an abstract class with 3 pure methods which have to be implemented. The template variables in the following line are both the dimension of the space.
class MyPde : public AbstractLinearEllipticPde<2,2> { private:
For efficiency, we will save the diffusion tensor that will be returned by one of the class' methods as a member variable. The diffusion tensor which has to be returned by the GetDiffusionTensor method in PDE classes is of the type c_matrix<double,SIZE,SIZE>, which is a u-blas matrix. We use ublas vectors and matrices where small vectors and matrices are needed. Note that ublas objects are only particularly efficient if optimisation is on (scons build=GccOpt ...).
c_matrix<double,2,2> mDiffusionTensor; public:
The constructor just sets up the diffusion tensor. We choose a diffusion tensor which corresponds to twice as much diffusion in the x-direction compared to the y-direction
MyPde() { mDiffusionTensor(0,0) = 2.0; mDiffusionTensor(0,1) = 0.0; mDiffusionTensor(1,0) = 0.0; mDiffusionTensor(1,1) = 1.0; }
The first method which has to be implemented returns the constant (not dependent on u) part of the source term, which for our PDE is x2 + y2.
double ComputeConstantInUSourceTerm(const ChastePoint<2>& rX, Element<2,2>* pElement) { return rX[0]*rX[0] + rX[1]*rX[1]; }
The second method which has to be implemented returns the coefficient in the linear-in-u part of the source term, which for our PDE is just 1.0.
double ComputeLinearInUCoeffInSourceTerm(const ChastePoint<2>& rX, Element<2,2>* pElement) { return 1.0; }
The third method returns the diffusion tensor D. Note that the diffusion tensor should be symmetric and positive definite for a physical, well-posed problem.
c_matrix<double,2,2> ComputeDiffusionTerm(const ChastePoint<2>& rX) { return mDiffusionTensor; } };
Next, we define the test suite (a class). It is sensible to name it the same as the filename. The class should inherit from CxxTest::TestSuite.
class TestSolvingLinearPdesTutorial : public CxxTest::TestSuite {
All individual test defined in this test suite must be declared as public.
public: void TestSolvingEllipticPde() throw(Exception) {
First we declare a mesh reader which reads mesh data files of the 'Triangle' format. The path given is relative to the main Chaste directory. As we are in 2d, the reader will look for three datafiles, [name].nodes, [name].ele and [name].edge. Note that the first template argument here is the spatial dimension of the elements in the mesh (ELEMENT_DIM), and the second is the dimension of the nodes, i.e. the dimension of the space the mesh lives in (SPACE_DIM). Usually ELEMENT_DIM and SPACE_DIM will be equal.
TrianglesMeshReader<2,2> mesh_reader("mesh/test/data/square_128_elements");
Now declare a tetrahedral mesh with the same dimensions...
TetrahedralMesh<2,2> mesh;
... and construct the mesh using the mesh reader.
mesh.ConstructFromMeshReader(mesh_reader);
Next we instantiate an instance of our PDE we wish to solve.
MyPde pde;
A set of boundary conditions are stored in a BoundaryConditionsContainer. The three template arguments are ELEMENT_DIM, SPACE_DIM and PROBLEM_DIM, the latter being the number of unknowns we are solving for. We have one unknown (ie u is a scalar, not a vector), so in this case PROBLEM_DIM=1.
BoundaryConditionsContainer<2,2,1> bcc;
Defining the boundary conditions is the only particularly fiddly part of solving PDEs, unless they are very simple, such as u=0 on the boundary, which could be done as follows:
//bcc.DefineZeroDirichletOnMeshBoundary(&mesh);
We want to specify u=0 on x=0 and y=0. To do this, we first create the boundary condition object saying what the value of the condition is at any particular point in space. Here we use the class ConstBoundaryCondition, a subclass of AbstractBoundaryCondition that yields the same constant value (0.0 here) everywhere it is used.
Note that the object is allocated with new. The BoundaryConditionsContainer object deals with deleting its associated boundary condition objects. Note too that we could allocate a separate condition object for each boundary node, but using the same object where possible is more memory efficient.
ConstBoundaryCondition<2>* p_zero_boundary_condition = new ConstBoundaryCondition<2>(0.0);
We then get a boundary node iterator from the mesh...
TetrahedralMesh<2,2>::BoundaryNodeIterator iter = mesh.GetBoundaryNodeIteratorBegin();
...and loop over the boundary nodes, getting the x and y values.
while (iter < mesh.GetBoundaryNodeIteratorEnd()) { double x = (*iter)->GetPoint()[0]; double y = (*iter)->GetPoint()[1];
If x=0 or y=0...
if ((x==0) || (y==0)) {
...associate the zero boundary condition created above with this boundary node (*iter being a pointer to a Node<2>).
bcc.AddDirichletBoundaryCondition(*iter, p_zero_boundary_condition); } iter++; }
Now we create Neumann boundary conditions for the surface elements on x=1 and y=1. Note that Dirichlet boundary conditions are defined on nodes, whereas Neumann boundary conditions are defined on surface elements. Note also that the natural boundary condition statement for this PDE is (D grad u).n = g(x) (where n is the outward-facing surface normal), and g(x) is a prescribed function, not something like du/dn=g(x). Hence the boundary condition we are specifying is (D grad u).n = 0.
Important note for 1D: This means that if we were solving 2uxx=f(x) in 1D, and wanted to specify du/dx=1 on the LHS boundary, the Neumann boundary value we have to specify is -2, as n=-1 (outward facing normal) so (D gradu).n = -2 when du/dx=1.
To define Neumann bcs, we reuse the zero boundary condition object defined above, but apply it at surface elements. We loop over these using another iterator provided by the mesh class.
TetrahedralMesh<2,2>::BoundaryElementIterator surf_iter = mesh.GetBoundaryElementIteratorBegin(); while (surf_iter != mesh.GetBoundaryElementIteratorEnd()) {
Get the x and y values of any node (here, the 0th) in the element.
unsigned node_index = (*surf_iter)->GetNodeGlobalIndex(0); double x = mesh.GetNode(node_index)->GetPoint()[0]; double y = mesh.GetNode(node_index)->GetPoint()[1];
If x=1 or y=1...
if ( (fabs(x-1.0) < 1e-6) || (fabs(y-1.0) < 1e-6) ) {
...associate the boundary condition with the surface element.
bcc.AddNeumannBoundaryCondition(*surf_iter, p_zero_boundary_condition); }
Finally increment the iterator.
surf_iter++; }
Next we define the solver of the PDE. To solve an AbstractLinearEllipticPde (which is the type of PDE MyPde is), we use a SimpleLinearEllipticSolver. The solver, again templated over ELEMENT_DIM and SPACE_DIM, needs to be given (pointers to) the mesh, pde and boundary conditions.
SimpleLinearEllipticSolver<2,2> solver(&mesh, &pde, &bcc);
To solve, just call Solve(). A PETSc vector is returned.
Vec result = solver.Solve();
It is a pain to access the individual components of a PETSc vector, even when running only on one process. A helper class called ReplicatableVector has been created. Create an instance of one of these, using the PETSc Vec as the data. The ith component of result can now be obtained by simply doing result_repl[i].
ReplicatableVector result_repl(result);
Let us write out the solution to a file. To do this, create an OutputFileHandler, passing in the directory we want files written to. This is relative to the directory defined by the CHASTE_TEST_OUTPUT environment variable - usually /tmp/$USER/testoutput. Note by default the output directory passed in is emptied by this command. To avoid this, false can be passed in as a second parameter.
OutputFileHandler output_file_handler("TestSolvingLinearPdeTutorial");
Create an out_stream, which is a stream to a particular file. An out_stream is a smart pointer to a std::ofstream.
out_stream p_file = output_file_handler.OpenOutputFile("linear_solution.txt");
Loop over the entries of the solution.
for (unsigned i=0; i<result_repl.GetSize(); i++) {
Get the x and y-values of the node corresponding to this entry. The method GetNode on the mesh class returns a pointer to a Node.
double x = mesh.GetNode(i)->rGetLocation()[0]; double y = mesh.GetNode(i)->rGetLocation()[1];
Get the computed solution at this node from the ReplicatableVector.
double u = result_repl[i];
Finally, write x, y and u to the output file. The solution could then be visualised in (eg) matlab, using the commands: sol=load('linear_solution.txt'); plot3(sol(:,1),sol(:,2),sol(:,3),'.');
(*p_file) << x << " " << y << " " << u << "\n"; }
All PETSc Vecs should be destroyed when they are no longer needed, or you will have a memory leak.
PetscTools::Destroy(result); }
Test 2: Solving a linear parabolic PDE
Now we solve a parabolic PDE. We choose a simple problem so that the code changes needed from the elliptic case are clearer. We will solve du/dt = div(grad u) + u, in 3d, with boundary conditions u=1 on the boundary, and initial conditions u=1.
void TestSolvingParabolicPde() throw(Exception) {
Create a 10 by 10 by 10 mesh in 3D, this time using the ConstructRegularSlabMesh method on the mesh. The first parameter is the cartesian space-step and the other three parameters are the width, height and depth of the mesh.
TetrahedralMesh<3,3> mesh; mesh.ConstructRegularSlabMesh(0.1, 1.0, 1.0, 1.0);
Our PDE object should be a class that is derived from the AbstractLinearParabolicPde. We could write it ourselves as in the previous test, but since the PDE we want to solve is so simple, it has already been defined (look it up! - it is located in pde/test/pdes).
HeatEquationWithSourceTerm<3> pde;
Create a new boundary conditions container and specify u=1.0 on the boundary.
BoundaryConditionsContainer<3,3,1> bcc; bcc.DefineConstantDirichletOnMeshBoundary(&mesh, 1.0);
Create an instance of the solver, passing in the mesh, pde and boundary conditions.
SimpleLinearParabolicSolver<3,3> solver(&mesh,&pde,&bcc);
For parabolic problems, initial conditions are also needed. The solver will expect a PETSc vector, where the i-th entry is the initial solution at node i, to be passed in. To create this PETSc Vec, we will use a helper function in the PetscTools class to create a Vec of size num_nodes, with each entry set to 1.0. Then we set the initial condition on the solver.
Vec initial_condition = PetscTools::CreateAndSetVec(mesh.GetNumNodes(), 1.0); solver.SetInitialCondition(initial_condition);
Next define the start time, end time, and timestep, and set them.
double t_start = 0; double t_end = 1; double dt = 0.01; solver.SetTimes(t_start, t_end); solver.SetTimeStep(dt);
When we call Solve() below we will just get the solution at the final time. If we want to have intermediate solutions written to file, we do the following. We start by specifying an output directory and filename prefix for our results file:
solver.SetOutputDirectoryAndPrefix("ParabolicSolverTutorial","results");
When an output directory has been specified, the solver writes output in HDF5 format. To convert this to another output format, we call the relevant method. Here, we convert the output to plain text files (VTK or cmgui formats are also possible). We also say how often to write the data, telling the solver to output results to file every tenth timestep. The solver will create one file for each variable (in this case there is only one variable) and for each time, so for example, the file results_Variable_0_10 is the results for u, over all nodes, at the 11th printed time. Have a look in the output directory after running the test. (For comments on visualising the data in matlab or octave, see the end of the tutorial UserTutorials/WritingPdeSolvers.)
solver.SetOutputToTxt(true); solver.SetPrintingTimestepMultiple(10);
Now we can solve the problem. The Vec that is returned can be passed into a ReplicatableVector as before.
Vec solution = solver.Solve(); ReplicatableVector solution_repl(solution);
Let's also solve the equivalent static PDE, i.e. set du/dt=0, so 0=div(gradu) + u. This is easy, as the PDE class has already been defined.
SimplePoissonEquation<3,3> static_pde; SimpleLinearEllipticSolver<3,3> static_solver(&mesh, &static_pde, &bcc); Vec static_solution = static_solver.Solve(); ReplicatableVector static_solution_repl(static_solution);
We can now compare the solution of the parabolic PDE at t=1 with the static solution, to see if the static equilibrium solution was reached in the former. (Ideally we should compute some relative error, but we just compute an absolute error for simplicity.)
for (unsigned i=0; i<static_solution_repl.GetSize(); i++) { TS_ASSERT_DELTA( solution_repl[i], static_solution_repl[i], 1e-3); }
All PETSc vectors should be destroyed when they are no longer needed.
PetscTools::Destroy(initial_condition); PetscTools::Destroy(solution); PetscTools::Destroy(static_solution); } };
Code
The full code is given below
File name TestSolvingLinearPdesTutorial.hpp
#include <cxxtest/TestSuite.h> #include "UblasIncludes.hpp" #include "SimpleLinearEllipticSolver.hpp" #include "SimpleLinearParabolicSolver.hpp" #include "HeatEquationWithSourceTerm.hpp" #include "SimplePoissonEquation.hpp" #include "TrianglesMeshReader.hpp" #include "TetrahedralMesh.hpp" #include "BoundaryConditionsContainer.hpp" #include "ConstBoundaryCondition.hpp" #include "OutputFileHandler.hpp" #include "PetscSetupAndFinalize.hpp" class MyPde : public AbstractLinearEllipticPde<2,2> { private: c_matrix<double,2,2> mDiffusionTensor; public: MyPde() { mDiffusionTensor(0,0) = 2.0; mDiffusionTensor(0,1) = 0.0; mDiffusionTensor(1,0) = 0.0; mDiffusionTensor(1,1) = 1.0; } double ComputeConstantInUSourceTerm(const ChastePoint<2>& rX, Element<2,2>* pElement) { return rX[0]*rX[0] + rX[1]*rX[1]; } double ComputeLinearInUCoeffInSourceTerm(const ChastePoint<2>& rX, Element<2,2>* pElement) { return 1.0; } c_matrix<double,2,2> ComputeDiffusionTerm(const ChastePoint<2>& rX) { return mDiffusionTensor; } }; class TestSolvingLinearPdesTutorial : public CxxTest::TestSuite { public: void TestSolvingEllipticPde() throw(Exception) { TrianglesMeshReader<2,2> mesh_reader("mesh/test/data/square_128_elements"); TetrahedralMesh<2,2> mesh; mesh.ConstructFromMeshReader(mesh_reader); MyPde pde; BoundaryConditionsContainer<2,2,1> bcc; //bcc.DefineZeroDirichletOnMeshBoundary(&mesh); ConstBoundaryCondition<2>* p_zero_boundary_condition = new ConstBoundaryCondition<2>(0.0); TetrahedralMesh<2,2>::BoundaryNodeIterator iter = mesh.GetBoundaryNodeIteratorBegin(); while (iter < mesh.GetBoundaryNodeIteratorEnd()) { double x = (*iter)->GetPoint()[0]; double y = (*iter)->GetPoint()[1]; if ((x==0) || (y==0)) { bcc.AddDirichletBoundaryCondition(*iter, p_zero_boundary_condition); } iter++; } TetrahedralMesh<2,2>::BoundaryElementIterator surf_iter = mesh.GetBoundaryElementIteratorBegin(); while (surf_iter != mesh.GetBoundaryElementIteratorEnd()) { unsigned node_index = (*surf_iter)->GetNodeGlobalIndex(0); double x = mesh.GetNode(node_index)->GetPoint()[0]; double y = mesh.GetNode(node_index)->GetPoint()[1]; if ( (fabs(x-1.0) < 1e-6) || (fabs(y-1.0) < 1e-6) ) { bcc.AddNeumannBoundaryCondition(*surf_iter, p_zero_boundary_condition); } surf_iter++; } SimpleLinearEllipticSolver<2,2> solver(&mesh, &pde, &bcc); Vec result = solver.Solve(); ReplicatableVector result_repl(result); OutputFileHandler output_file_handler("TestSolvingLinearPdeTutorial"); out_stream p_file = output_file_handler.OpenOutputFile("linear_solution.txt"); for (unsigned i=0; i<result_repl.GetSize(); i++) { double x = mesh.GetNode(i)->rGetLocation()[0]; double y = mesh.GetNode(i)->rGetLocation()[1]; double u = result_repl[i]; (*p_file) << x << " " << y << " " << u << "\n"; } PetscTools::Destroy(result); } void TestSolvingParabolicPde() throw(Exception) { TetrahedralMesh<3,3> mesh; mesh.ConstructRegularSlabMesh(0.1, 1.0, 1.0, 1.0); HeatEquationWithSourceTerm<3> pde; BoundaryConditionsContainer<3,3,1> bcc; bcc.DefineConstantDirichletOnMeshBoundary(&mesh, 1.0); SimpleLinearParabolicSolver<3,3> solver(&mesh,&pde,&bcc); Vec initial_condition = PetscTools::CreateAndSetVec(mesh.GetNumNodes(), 1.0); solver.SetInitialCondition(initial_condition); double t_start = 0; double t_end = 1; double dt = 0.01; solver.SetTimes(t_start, t_end); solver.SetTimeStep(dt); solver.SetOutputDirectoryAndPrefix("ParabolicSolverTutorial","results"); solver.SetOutputToTxt(true); solver.SetPrintingTimestepMultiple(10); Vec solution = solver.Solve(); ReplicatableVector solution_repl(solution); SimplePoissonEquation<3,3> static_pde; SimpleLinearEllipticSolver<3,3> static_solver(&mesh, &static_pde, &bcc); Vec static_solution = static_solver.Solve(); ReplicatableVector static_solution_repl(static_solution); for (unsigned i=0; i<static_solution_repl.GetSize(); i++) { TS_ASSERT_DELTA( solution_repl[i], static_solution_repl[i], 1e-3); } PetscTools::Destroy(initial_condition); PetscTools::Destroy(solution); PetscTools::Destroy(static_solution); } };