#include <ElectroMechanicsProblemDefinition.hpp>

Inheritance diagram for ElectroMechanicsProblemDefinition< DIM >:

Collaboration diagram for ElectroMechanicsProblemDefinition< DIM >:

Public Member Functions
	ElectroMechanicsProblemDefinition (QuadraticMesh< DIM > &rMesh)

virtual	~ElectroMechanicsProblemDefinition ()

void	SetContractionModel (ContractionModelName contractionModel, double timestep)

void	SetContractionCellFactory (AbstractContractionCellFactory< DIM > *pCellFactory)

void	SetUseDefaultCardiacMaterialLaw (CompressibilityType compressibilityType)

void	SetSolverType (SolverType solver)

void	SetDeformationAffectsElectrophysiology (bool deformationAffectsConductivity, bool deformationAffectsCellModels)

void	SetMechanicsSolveTimestep (double timestep)

void	SetVariableFibreSheetDirectionsFile (const FileFinder &rFibreSheetDirectionsFile, bool definedPerQuadPoint)

void	SetApplyIsotropicCrossFibreTension (bool applyCrossFibreTension, double crossFibreTensionFraction)

void	SetApplyAnisotropicCrossFibreTension (bool applyCrossFibreTension, double sheetTensionFraction, double sheetNormalTensionFraction)

AbstractContractionCellFactory < DIM > *	GetContractionCellFactory ()

void	SetContractionModelOdeTimestep (double timestep)

double	GetContractionModelOdeTimestep ()

double	GetMechanicsSolveTimestep ()

bool	GetDeformationAffectsConductivity ()

bool	GetDeformationAffectsCellModels ()

SolverType	GetSolverType ()

bool	ReadFibreSheetDirectionsFromFile ()

FileFinder	GetFibreSheetDirectionsFile ()

bool	GetFibreSheetDirectionsDefinedPerQuadraturePoint ()

void	SetNumIncrementsForInitialDeformation (unsigned numIncrements)

unsigned	GetNumIncrementsForInitialDeformation ()

double	GetApplyCrossFibreTension ()

double	GetSheetTensionFraction ()

double	GetSheetNormalTensionFraction ()

virtual void	Validate ()

Public Member Functions inherited from SolidMechanicsProblemDefinition< DIM >
	SolidMechanicsProblemDefinition (AbstractTetrahedralMesh< DIM, DIM > &rMesh)

virtual	~SolidMechanicsProblemDefinition ()

void	SetMaterialLaw (CompressibilityType compressibilityType, AbstractMaterialLaw< DIM > *pMaterialLaw)

void	SetMaterialLaw (CompressibilityType compressibilityType, std::vector< AbstractMaterialLaw< DIM > * > &rMaterialLaws)

bool	IsHomogeneousMaterial ()

CompressibilityType	GetCompressibilityType ()

AbstractIncompressibleMaterialLaw < DIM > *	GetIncompressibleMaterialLaw (unsigned elementIndex)

AbstractCompressibleMaterialLaw < DIM > *	GetCompressibleMaterialLaw (unsigned elementIndex)

void	SetZeroDisplacementNodes (std::vector< unsigned > &rFixedNodes)

void	SetFixedNodes (std::vector< unsigned > &rFixedNodes, std::vector< c_vector< double, DIM > > &rFixedNodeLocation)

void	SetSolveUsingSnes (bool solveUsingSnes=true)

bool	GetSolveUsingSnes ()

Public Member Functions inherited from ContinuumMechanicsProblemDefinition< DIM >
	ContinuumMechanicsProblemDefinition (AbstractTetrahedralMesh< DIM, DIM > &rMesh)

virtual	~ContinuumMechanicsProblemDefinition ()

void	SetDensity (double density)

double	GetDensity ()

void	SetZeroDirichletNodes (std::vector< unsigned > &rZeroDirichletNodes)

std::vector< unsigned > &	rGetDirichletNodes ()

std::vector< c_vector< double, DIM > > &	rGetDirichletNodeValues ()

void	SetBodyForce (c_vector< double, DIM > bodyForce)

void	SetBodyForce (c_vector< double, DIM >(*pFunction)(c_vector< double, DIM > &rX, double t))

c_vector< double, DIM >	GetBodyForce (c_vector< double, DIM > &rX, double t=0.0)

BodyForceType	GetBodyForceType ()

c_vector< double, DIM >	GetConstantBodyForce ()

c_vector< double, DIM >	EvaluateBodyForceFunction (c_vector< double, DIM > &rX, double t)

TractionBoundaryConditionType	GetTractionBoundaryConditionType ()

void	SetTractionBoundaryConditions (std::vector< BoundaryElement< DIM-1, DIM > * > &rTractionBoundaryElements, std::vector< c_vector< double, DIM > > &rElementwiseTractions)

void	SetTractionBoundaryConditions (std::vector< BoundaryElement< DIM-1, DIM > * > &rTractionBoundaryElements, c_vector< double, DIM >(*pFunction)(c_vector< double, DIM > &rX, double t))

void	SetApplyNormalPressureOnDeformedSurface (std::vector< BoundaryElement< DIM-1, DIM > * > &rTractionBoundaryElements, double normalPressure)

void	SetApplyNormalPressureOnDeformedSurface (std::vector< BoundaryElement< DIM-1, DIM > * > &rTractionBoundaryElements, double(*pFunction)(double t))

std::vector< BoundaryElement < DIM-1, DIM > * > &	rGetTractionBoundaryElements ()

std::vector< c_vector< double, DIM > > &	rGetElementwiseTractions ()

double	GetNormalPressure ()

void	SetPressureScaling (double scaleFactor)

c_vector< double, DIM >	EvaluateTractionFunction (c_vector< double, DIM > &rX, double t)

double	EvaluateNormalPressureFunction (double t)

void	SetVerboseDuringSolve (bool verboseDuringSolve=true)

bool	GetVerboseDuringSolve ()

Friends
class	TestExplicitCardiacMechanicsSolver

class	TestImplicitCardiacMechanicsSolver

class	TestElectroMechanicsProblemDefinition

Additional Inherited Members
Static Public Attributes inherited from ContinuumMechanicsProblemDefinition< DIM >
static const double	FREE = std::numeric_limits<double>::max()

Protected Attributes inherited from ContinuumMechanicsProblemDefinition< DIM >
AbstractTetrahedralMesh< DIM, DIM > &	mrMesh

double	mDensity

BodyForceType	mBodyForceType

c_vector< double, DIM >	mConstantBodyForce

c_vector< double, DIM >(*	mpBodyForceFunction )(c_vector< double, DIM > &rX, double t)

TractionBoundaryConditionType	mTractionBoundaryConditionType

std::vector< BoundaryElement < DIM-1, DIM > * >	mTractionBoundaryElements

std::vector< c_vector< double, DIM > >	mElementwiseTractions

double	mNormalPressure

double	mOriginalNormalPressure

c_vector< double, DIM >(*	mpTractionBoundaryConditionFunction )(c_vector< double, DIM > &rX, double t)

double(*	mpNormalPressureFunction )(double t)

std::vector< unsigned >	mDirichletNodes

std::vector< c_vector< double, DIM > >	mDirichletNodeValues

bool	mVerboseDuringSolve

Detailed Description

template<unsigned DIM>
class ElectroMechanicsProblemDefinition< DIM >

Subclass of SolidMechanicsProblemDefinition with some cardiac-electro-mechanics-specific methods.

Definition at line 52 of file ElectroMechanicsProblemDefinition.hpp.

Constructor & Destructor Documentation

template<unsigned DIM>

ElectroMechanicsProblemDefinition< DIM >::ElectroMechanicsProblemDefinition ( QuadraticMesh< DIM > & rMesh )

Constructor

Parameters

rMesh the mesh

Definition at line 40 of file ElectroMechanicsProblemDefinition.cpp.

template<unsigned DIM>

ElectroMechanicsProblemDefinition< DIM >::~ElectroMechanicsProblemDefinition ( )

virtual

Destructor

Definition at line 59 of file ElectroMechanicsProblemDefinition.cpp.

Member Function Documentation

template<unsigned DIM>

double ElectroMechanicsProblemDefinition< DIM >::GetApplyCrossFibreTension ( )

inline

Returns: true if cross-fibre tension is applied.

Definition at line 375 of file ElectroMechanicsProblemDefinition.hpp.

References ElectroMechanicsProblemDefinition< DIM >::mApplyCrossFibreTension.

template<unsigned DIM>

AbstractContractionCellFactory<DIM>* ElectroMechanicsProblemDefinition< DIM >::GetContractionCellFactory ( )

inline

Returns: A pointer to the contraction cell factory that should be applied to the mechanics mesh.

Definition at line 257 of file ElectroMechanicsProblemDefinition.hpp.

References ElectroMechanicsProblemDefinition< DIM >::mpContractionCellFactory.

template<unsigned DIM>

double ElectroMechanicsProblemDefinition< DIM >::GetContractionModelOdeTimestep ( )

inline

Returns: the contraction model time step.

Definition at line 278 of file ElectroMechanicsProblemDefinition.hpp.

References ElectroMechanicsProblemDefinition< DIM >::mContractionModelOdeTimeStep.

template<unsigned DIM>

bool ElectroMechanicsProblemDefinition< DIM >::GetDeformationAffectsCellModels ( )

inline

Returns: whether the deformation affects the cardiac cell models, for example if there are stretch-activated channels in the cell model.

Definition at line 306 of file ElectroMechanicsProblemDefinition.hpp.

References ElectroMechanicsProblemDefinition< DIM >::mDeformationAffectsCellModels.

template<unsigned DIM>

bool ElectroMechanicsProblemDefinition< DIM >::GetDeformationAffectsConductivity ( )

inline

Returns: whether the deformation affects the electrical physiological conductivity (or whether this effect is neglected).

Definition at line 297 of file ElectroMechanicsProblemDefinition.hpp.

References ElectroMechanicsProblemDefinition< DIM >::mDeformationAffectsConductivity.

template<unsigned DIM>

bool ElectroMechanicsProblemDefinition< DIM >::GetFibreSheetDirectionsDefinedPerQuadraturePoint ( )

inline

Returns: whether the fibre-sheet info is defined for each quadrature point in the mesh (if not, if it defined for each element in the mesh). (Should only be called if ReadFibreSheetDirectionsFromFile() returns true).

Definition at line 342 of file ElectroMechanicsProblemDefinition.hpp.

References ElectroMechanicsProblemDefinition< DIM >::mFibreSheetDirectionsDefinedPerQuadraturePoint, and ElectroMechanicsProblemDefinition< DIM >::mReadFibreSheetInformationFromFile.

template<unsigned DIM>

FileFinder ElectroMechanicsProblemDefinition< DIM >::GetFibreSheetDirectionsFile ( )

inline

Returns: the fibre-sheet file (should only be called if ReadFibreSheetDirectionsFromFile() returns true).

Definition at line 330 of file ElectroMechanicsProblemDefinition.hpp.

References FileFinder::GetAbsolutePath(), ElectroMechanicsProblemDefinition< DIM >::mFibreSheetDirectionsFile, and ElectroMechanicsProblemDefinition< DIM >::mReadFibreSheetInformationFromFile.

template<unsigned DIM>

double ElectroMechanicsProblemDefinition< DIM >::GetMechanicsSolveTimestep ( )

inline

Returns: how often the mechanics PDEs are solved.

Definition at line 287 of file ElectroMechanicsProblemDefinition.hpp.

References ElectroMechanicsProblemDefinition< DIM >::mMechanicsSolveTimestep.

template<unsigned DIM>

unsigned ElectroMechanicsProblemDefinition< DIM >::GetNumIncrementsForInitialDeformation ( )

inline

Returns: the number of increments to be used in the initial deformation (see SetNumIncrementsForInitialDeformation() for more details).

Definition at line 367 of file ElectroMechanicsProblemDefinition.hpp.

References ElectroMechanicsProblemDefinition< DIM >::mNumIncrementsForInitialDeformation.

template<unsigned DIM>

double ElectroMechanicsProblemDefinition< DIM >::GetSheetNormalTensionFraction ( )

inline

Returns: the value of the cross-fibre sheet-normal tension fraction.

Definition at line 391 of file ElectroMechanicsProblemDefinition.hpp.

References ElectroMechanicsProblemDefinition< DIM >::mSheetNormalTensionFraction.

template<unsigned DIM>

double ElectroMechanicsProblemDefinition< DIM >::GetSheetTensionFraction ( )

inline

Returns: the value of the cross-fibre sheet tension fraction.

Definition at line 383 of file ElectroMechanicsProblemDefinition.hpp.

References ElectroMechanicsProblemDefinition< DIM >::mSheetTensionFraction.

template<unsigned DIM>

SolverType ElectroMechanicsProblemDefinition< DIM >::GetSolverType ( )

inline

Returns: Whether to use an implicit or explicit mechanics solver.

Definition at line 314 of file ElectroMechanicsProblemDefinition.hpp.

References ElectroMechanicsProblemDefinition< DIM >::mSolverType.

template<unsigned DIM>

bool ElectroMechanicsProblemDefinition< DIM >::ReadFibreSheetDirectionsFromFile ( )

inline

Returns: whether the fibre-sheet info should be read from file (if not the defaults should be used).

Definition at line 322 of file ElectroMechanicsProblemDefinition.hpp.

References ElectroMechanicsProblemDefinition< DIM >::mReadFibreSheetInformationFromFile.

template<unsigned DIM>

void ElectroMechanicsProblemDefinition< DIM >::SetApplyAnisotropicCrossFibreTension	(	bool	applyCrossFibreTension,
		double	sheetTensionFraction,
		double	sheetNormalTensionFraction
	)

Set if active tension should be applied in the cross-fibre directions. This only makes sense in 3D.

By default active tension is only applied in the fibre direction. This method allows the user to specify that a proportion of the active tension should also be applied in the cross-fibre directions. The fraction of the active tension that is applied in the two cross-fibre direction should be specified.

Parameters

applyCrossFibreTension	active tension is applied in the cross-fibre directions if set to true.
sheetTensionFraction	The fraction of the active tension to apply in the sheet direction.
sheetNormalTensionFraction	The fraction of the active tension to apply in the sheet-normal direction.

Definition at line 143 of file ElectroMechanicsProblemDefinition.cpp.

References EXCEPTION.

template<unsigned DIM>

void ElectroMechanicsProblemDefinition< DIM >::SetApplyIsotropicCrossFibreTension	(	bool	applyCrossFibreTension,
		double	crossFibreTensionFraction
	)

Set if active tension should be applied in the cross-fibre directions. This can be done in 2D or 3D.

By default active tension is only applied in the fibre direction. This method allows the user to specify that a proportion of the active tension should also be applied in the cross-fibre directions (both in the sheet and sheet-normal directions equally). The fraction of the active tension that is applied in the cross-fibre direction should be specified.

Parameters

applyCrossFibreTension	active tension is applied in the cross-fibre directions if set to true.
crossFibreTensionFraction	The fraction of the active tension to apply in the cross-fibre directions.

Definition at line 135 of file ElectroMechanicsProblemDefinition.cpp.

template<unsigned DIM>

void ElectroMechanicsProblemDefinition< DIM >::SetContractionCellFactory ( AbstractContractionCellFactory< DIM > * pCellFactory )

We provide an interface to set heterogeneous contraction cells via a cell factory, which allows different models (or parameters) to be set per element.

Note you also need to call SetContractionModelOdeTimestep() before solving.

Parameters

pCellFactory The contraction cell factory to be used.

Definition at line 155 of file ElectroMechanicsProblemDefinition.cpp.

References AbstractContractionCellFactory< DIM >::SetMechanicsMesh().

template<unsigned DIM>

void ElectroMechanicsProblemDefinition< DIM >::SetContractionModel	(	ContractionModelName	contractionModel,
		double	timestep
	)

Set the contraction model to be used (throughout the tissue).

Note the timestep should be set to a (typical) ODE time-step even if the contraction model is not going to solve ODEs.

Parameters

contractionModel	contraction model (from the enumeration ContractionModelName)
timestep	timestep to be used in solving (ODE-based) contraction models.

Definition at line 73 of file ElectroMechanicsProblemDefinition.cpp.

template<unsigned DIM>

void ElectroMechanicsProblemDefinition< DIM >::SetContractionModelOdeTimestep ( double timestep )

inline

Set the timestep to be used when solving contraction models. Note that you will need to use the finest timestep that any of the models requires, it is not set on a per-model basis.

Parameters

timestep Timestep to use.

Definition at line 270 of file ElectroMechanicsProblemDefinition.hpp.

References ElectroMechanicsProblemDefinition< DIM >::mContractionModelOdeTimeStep.

template<unsigned DIM>

void ElectroMechanicsProblemDefinition< DIM >::SetDeformationAffectsElectrophysiology	(	bool	deformationAffectsConductivity,
		bool	deformationAffectsCellModels
	)

Set if and how the deformation should affect the electro-physiology.

Parameters

deformationAffectsConductivity	Whether the deformation should affect the electrical physiological conductivity (or whether this effect is neglected)
deformationAffectsCellModels	Whether the deformation should affect the cardiac cell models, for example if there are stretch-activated channels in the cell model.

Several important things to note: (i) this can't be called if fibre-sheet directions have been defined from file for each quadrature point (as opposed to each mechanics element) - this is because if the stretch is to be passed back to the electric mesh nodes, the fibre direction has to be defined at those nodes (ii) currently the set-up stage (computing mechanics mesh elements and weights for electrics mesh nodes) is inefficiently implemented - setup will be very slow for big meshes (iii) if deformationAffectsCellModels is true, the cell model ought to be one for which AbstractCardiacCell::SetStretch() has been implemented to do something (i.e. not generated automatically from CellML). (iv) deformationAffectsConductivity is not currently allowed in the compressible material law case as the effect of the determinant of the deformation gradient on the conductivity has not currently been implemented.

Definition at line 113 of file ElectroMechanicsProblemDefinition.cpp.

template<unsigned DIM>

void ElectroMechanicsProblemDefinition< DIM >::SetMechanicsSolveTimestep ( double timestep )

Set how often the mechanics is solved for.

Parameters

timestep timestep

Definition at line 120 of file ElectroMechanicsProblemDefinition.cpp.

template<unsigned DIM>

void ElectroMechanicsProblemDefinition< DIM >::SetNumIncrementsForInitialDeformation ( unsigned numIncrements )

inline

The first deformation (to find the equilibrium state given the loading) may require the loading to be incremented, in order for the Solve() to converge. Set the number of increments to be used.

Parameters

numIncrements number of increments

Definition at line 354 of file ElectroMechanicsProblemDefinition.hpp.

References EXCEPTION, and ElectroMechanicsProblemDefinition< DIM >::mNumIncrementsForInitialDeformation.

template<unsigned DIM>

void ElectroMechanicsProblemDefinition< DIM >::SetSolverType ( SolverType solver )

inline

Decide which type of solver to attempt to use. Default value is IMPLICIT if this method is not called.

Parameters

solver The solver type to use (EXPLICIT or IMPLICIT).

Definition at line 175 of file ElectroMechanicsProblemDefinition.hpp.

References ElectroMechanicsProblemDefinition< DIM >::mSolverType.

template<unsigned DIM>

void ElectroMechanicsProblemDefinition< DIM >::SetUseDefaultCardiacMaterialLaw ( CompressibilityType compressibilityType )

Use the default material law (NashHunter in the incompressible case, exponential in the compressible case), throughout the tissue.

Parameters

compressibilityType Either INCOMPRESSIBLE or COMPRESSIBLE

Definition at line 93 of file ElectroMechanicsProblemDefinition.cpp.

template<unsigned DIM>

void ElectroMechanicsProblemDefinition< DIM >::SetVariableFibreSheetDirectionsFile	(	const FileFinder &	rFibreSheetDirectionsFile,
		bool	definedPerQuadPoint
	)

Set a variable fibre-sheet-normal direction (matrices), from file. If the second parameter is false, there should be one fibre-sheet definition for each element; otherwise there should be one fibre-sheet definition for each *quadrature point* in the mesh. In the first case, the file should be a standard .ortho file (ie each line has the fibre dir, sheet dir, normal dir for that element), in the second it should have .orthoquad as the format.

If this method is not called, the default fibre-sheet directions are used - ie fibres parallel to X-axis, sheets parallel to Y-axis.

Parameters

rFibreSheetDirectionsFile	the file containing the fibre/sheet directions
definedPerQuadPoint	whether the fibre-sheet definitions are for each quadrature point in the mesh (if not, one for each element is assumed).

Definition at line 127 of file ElectroMechanicsProblemDefinition.cpp.

template<unsigned DIM>

void ElectroMechanicsProblemDefinition< DIM >::Validate ( )

virtual

Check all variables are set appropriately. Exceptions are thrown if any are not. Derived classes can override but should call this version as well.

Reimplemented from SolidMechanicsProblemDefinition< DIM >.

Definition at line 165 of file ElectroMechanicsProblemDefinition.cpp.

References EXCEPTION, and SolidMechanicsProblemDefinition< DIM >::Validate().

Member Data Documentation

template<unsigned DIM>

bool ElectroMechanicsProblemDefinition< DIM >::mApplyCrossFibreTension

private

Whether to apply active tension in the cross-fibre directions (either iso- or aniso-tropic).

Definition at line 108 of file ElectroMechanicsProblemDefinition.hpp.

Referenced by ElectroMechanicsProblemDefinition< DIM >::GetApplyCrossFibreTension().

template<unsigned DIM>

double ElectroMechanicsProblemDefinition< DIM >::mContractionModelOdeTimeStep

private

Timestep to use when solving contraction models

Definition at line 60 of file ElectroMechanicsProblemDefinition.hpp.

Referenced by ElectroMechanicsProblemDefinition< DIM >::GetContractionModelOdeTimestep(), and ElectroMechanicsProblemDefinition< DIM >::SetContractionModelOdeTimestep().

template<unsigned DIM>

bool ElectroMechanicsProblemDefinition< DIM >::mDeformationAffectsCellModels

private

Whether the deformation should affect the cardiac cell models, for example if there are stretch-activated channels in the cell model.

Definition at line 75 of file ElectroMechanicsProblemDefinition.hpp.

Referenced by ElectroMechanicsProblemDefinition< DIM >::GetDeformationAffectsCellModels().

template<unsigned DIM>

bool ElectroMechanicsProblemDefinition< DIM >::mDeformationAffectsConductivity

private

Whether the deformation should affect the electrical physiological conductivity (or whether this effect is neglected)

Definition at line 69 of file ElectroMechanicsProblemDefinition.hpp.

Referenced by ElectroMechanicsProblemDefinition< DIM >::GetDeformationAffectsConductivity().

template<unsigned DIM>

bool ElectroMechanicsProblemDefinition< DIM >::mFibreSheetDirectionsDefinedPerQuadraturePoint

private

Whether the mFibreSheetDirectionsFile file gives the fibre-sheet info for each element or for each quadrature point

Definition at line 96 of file ElectroMechanicsProblemDefinition.hpp.

Referenced by ElectroMechanicsProblemDefinition< DIM >::GetFibreSheetDirectionsDefinedPerQuadraturePoint().

template<unsigned DIM>

FileFinder ElectroMechanicsProblemDefinition< DIM >::mFibreSheetDirectionsFile

private

.ortho/.orthoquad file from which to read element-wise, or quadrature-point-wise fibre-sheet-normal-directions

Definition at line 90 of file ElectroMechanicsProblemDefinition.hpp.

Referenced by ElectroMechanicsProblemDefinition< DIM >::GetFibreSheetDirectionsFile().

template<unsigned DIM>

double ElectroMechanicsProblemDefinition< DIM >::mMechanicsSolveTimestep

private

How often a mechanics solve should be done

Definition at line 63 of file ElectroMechanicsProblemDefinition.hpp.

Referenced by ElectroMechanicsProblemDefinition< DIM >::GetMechanicsSolveTimestep().

template<unsigned DIM>

unsigned ElectroMechanicsProblemDefinition< DIM >::mNumIncrementsForInitialDeformation

private

The first deformation (to find the equilibrium state given the loading) may require the loading to be incremented, in order for the Solve() to converge - this stores the number of increments to be used (initialised to 1)

Definition at line 103 of file ElectroMechanicsProblemDefinition.hpp.

Referenced by ElectroMechanicsProblemDefinition< DIM >::GetNumIncrementsForInitialDeformation(), and ElectroMechanicsProblemDefinition< DIM >::SetNumIncrementsForInitialDeformation().

template<unsigned DIM>

AbstractContractionCellFactory<DIM>* ElectroMechanicsProblemDefinition< DIM >::mpContractionCellFactory

private

The contraction cell factory, provides the contraction model to use on each element

Definition at line 121 of file ElectroMechanicsProblemDefinition.hpp.

Referenced by ElectroMechanicsProblemDefinition< DIM >::GetContractionCellFactory().

template<unsigned DIM>

AbstractMaterialLaw<DIM>* ElectroMechanicsProblemDefinition< DIM >::mpDefaultMaterialLaw

private

This member variable is used if SetDefaultCardiacMateriawLaw() is called.

Definition at line 80 of file ElectroMechanicsProblemDefinition.hpp.

template<unsigned DIM>

bool ElectroMechanicsProblemDefinition< DIM >::mReadFibreSheetInformationFromFile

private

Whether to read fibre-sheet information from file

Definition at line 84 of file ElectroMechanicsProblemDefinition.hpp.

Referenced by ElectroMechanicsProblemDefinition< DIM >::GetFibreSheetDirectionsDefinedPerQuadraturePoint(), ElectroMechanicsProblemDefinition< DIM >::GetFibreSheetDirectionsFile(), and ElectroMechanicsProblemDefinition< DIM >::ReadFibreSheetDirectionsFromFile().

template<unsigned DIM>

double ElectroMechanicsProblemDefinition< DIM >::mSheetNormalTensionFraction

private

The fraction of the fibre tension to apply in the sheet-normal direction.

Definition at line 118 of file ElectroMechanicsProblemDefinition.hpp.

Referenced by ElectroMechanicsProblemDefinition< DIM >::GetSheetNormalTensionFraction().

template<unsigned DIM>

double ElectroMechanicsProblemDefinition< DIM >::mSheetTensionFraction

private

The fraction of the fibre tension to apply in the sheet direction.

Definition at line 113 of file ElectroMechanicsProblemDefinition.hpp.

Referenced by ElectroMechanicsProblemDefinition< DIM >::GetSheetTensionFraction().

template<unsigned DIM>

SolverType ElectroMechanicsProblemDefinition< DIM >::mSolverType

private

Whether to use an explicit or implicit solver

Definition at line 127 of file ElectroMechanicsProblemDefinition.hpp.

Referenced by ElectroMechanicsProblemDefinition< DIM >::GetSolverType(), and ElectroMechanicsProblemDefinition< DIM >::SetSolverType().

template<unsigned DIM>

bool ElectroMechanicsProblemDefinition< DIM >::mWeMadeCellFactory

private

Whether we made the cell factory and therefore need to delete it!

Definition at line 124 of file ElectroMechanicsProblemDefinition.hpp.

The documentation for this class was generated from the following files:

heart/src/problem/ElectroMechanicsProblemDefinition.hpp
heart/src/problem/ElectroMechanicsProblemDefinition.cpp

Private Attributes
double	mContractionModelOdeTimeStep

double	mMechanicsSolveTimestep

bool	mDeformationAffectsConductivity

bool	mDeformationAffectsCellModels

AbstractMaterialLaw< DIM > *	mpDefaultMaterialLaw

bool	mReadFibreSheetInformationFromFile

FileFinder	mFibreSheetDirectionsFile

bool	mFibreSheetDirectionsDefinedPerQuadraturePoint

unsigned	mNumIncrementsForInitialDeformation

bool	mApplyCrossFibreTension

double	mSheetTensionFraction

double	mSheetNormalTensionFraction

AbstractContractionCellFactory < DIM > *	mpContractionCellFactory

bool	mWeMadeCellFactory

SolverType	mSolverType

Public Member Functions

Private Attributes

Friends

Additional Inherited Members

Detailed Description

template<unsigned DIM> class ElectroMechanicsProblemDefinition< DIM >

Constructor & Destructor Documentation

Member Function Documentation

Member Data Documentation

template<unsigned DIM>
class ElectroMechanicsProblemDefinition< DIM >