Todo List

Member AbstractBidomainSolver< ELEMENT_DIM, SPACE_DIM >::InitialiseForSolve (Vec initialSolution)

: block preconditioners only make sense in Bidomain... Add some warning/error message

: #1082 only works if you know about the whole mesh.

Member AbstractCardiacMechanicsSolver< ELASTICITY_SOLVER, DIM >::SetCalciumAndVoltage (std::vector< double > &rCalciumConcentrations, std::vector< double > &rVoltages)

#1828 / #1211 don't pass in entire vector

Member AbstractCardiacProblem< ELEMENT_DIM, SPACE_DIM, PROBLEM_DIM >::CreateInitialCondition ()

Perhaps this should be a method of AbstractCardiacTissue??

Member AbstractCardiacProblem< ELEMENT_DIM, SPACE_DIM, PROBLEM_DIM >::load (Archive &archive, const unsigned int version)

#1317 code for saving/loading mSolution is PROBLEM_DIM specific, move it into the save/load methods for Mono and BidomainProblem. (ExtendedBidomain has its own already.)

#1317 is there a reason we can't use PETSc's load/save vector functionality?

Member AbstractCardiacProblem< ELEMENT_DIM, SPACE_DIM, PROBLEM_DIM >::PreSolveChecks ()

remove magic number? (#1884)

Member AbstractCardiacProblem< ELEMENT_DIM, SPACE_DIM, PROBLEM_DIM >::save (Archive &archive, const unsigned int version) const

#1317 code for saving/loading mSolution is PROBLEM_DIM specific, move it into the save/load methods for Mono and BidomainProblem. Note that extended_bidomain has its own version of this code.

Member AbstractCardiacProblem< ELEMENT_DIM, SPACE_DIM, PROBLEM_DIM >::SetUseTimeAdaptivityController (bool useAdaptivity, AbstractTimeAdaptivityController *pController=NULL)

#1704 add default adaptivity controller and allow the user just to call with true

Member AbstractCardiacTissue< ELEMENT_DIM, SPACE_DIM >::CreateIntracellularConductivityTensor ()

#1316 Create a class defining constant tensors to be used when no fibre orientation is provided.

#1316 Create a class defining constant tensors to be used when no fibre orientation is provided.

Member AbstractCardiacTissue< ELEMENT_DIM, SPACE_DIM >::SolveCellSystems (Vec existingSolution, double time, double nextTime, bool updateVoltage=false)

This may want to go to std::cerr ??

#2017 This code will be needed in the future, not being covered now. Add a test which covers this, e.g. by doing a simulation with a bad stimulus for one of the Purkinje cells - stimulating with the wrong choice of sign say.

Member AbstractCellBasedSimulation< ELEMENT_DIM, SPACE_DIM >::DoCellBirth ()

(#2578)

Member AbstractCellPopulation< ELEMENT_DIM, SPACE_DIM >::GetCellUsingLocationIndex (unsigned index)

should be an exception?

Member AbstractCellPopulation< ELEMENT_DIM, SPACE_DIM >::OutputCellPopulationInfo (out_stream &rParamsFile)

this currently ignores different parameter regimes (#1453)

this currently ignores different parameter regimes (#1453)

Member AbstractChasteRegion< SPACE_DIM >::Destroy ()

Proper memory management Cleans any data which the concrete class may have created (archiving)

Member AbstractConvergenceTester< CELL, CARDIAC_PROBLEM, DIM, PROBLEM_DIM >::Converge (std::string nameOfTest)

This is a scarily long method; could do with some parts extracted?

consider reducing all stimuli to match this one.

remove magic number? (#1884)

Member AbstractConvergenceTester< CELL, CARDIAC_PROBLEM, DIM, PROBLEM_DIM >::DisplayRun ()

The UseAbsoluteStimulus is temporary, while we are sorting out 3D stimulus. It is to be removed later (along with StimulusConvergenceTester)

Member AbstractDynamicallyLoadableEntity::~AbstractDynamicallyLoadableEntity ()

#1957

Member AbstractFeCableIntegralAssembler< ELEMENT_DIM, SPACE_DIM, PROBLEM_DIM, CAN_ASSEMBLE_VECTOR, CAN_ASSEMBLE_MATRIX, INTERPOLATION_LEVEL >::AssembleOnCableElement (Element< CABLE_ELEMENT_DIM, SPACE_DIM > &rElement, c_matrix< double, PROBLEM_DIM *NUM_CABLE_ELEMENT_NODES, PROBLEM_DIM *NUM_CABLE_ELEMENT_NODES > &rAElem, c_vector< double, PROBLEM_DIM *NUM_CABLE_ELEMENT_NODES > &rBElem)

#1320 This assumes that the Jacobian is constant on an element. This is true for linear basis functions, but not for any other type of basis function.

Member AbstractFeSurfaceIntegralAssembler< ELEMENT_DIM, SPACE_DIM, PROBLEM_DIM >::AssembleOnSurfaceElement (const BoundaryElement< ELEMENT_DIM-1, SPACE_DIM > &rSurfaceElement, c_vector< double, PROBLEM_DIM *ELEMENT_DIM > &rBSurfElem)

#1321 Improve efficiency of Neumann BC implementation

Member AbstractFeVolumeIntegralAssembler< ELEMENT_DIM, SPACE_DIM, PROBLEM_DIM, CAN_ASSEMBLE_VECTOR, CAN_ASSEMBLE_MATRIX, INTERPOLATION_LEVEL >::AssembleOnElement (Element< ELEMENT_DIM, SPACE_DIM > &rElement, c_matrix< double, PROBLEM_DIM *(ELEMENT_DIM+1), PROBLEM_DIM *(ELEMENT_DIM+1) > &rAElem, c_vector< double, PROBLEM_DIM *(ELEMENT_DIM+1)> &rBElem)

#1320 This assumes that the Jacobian is constant on an element. This is true for linear basis functions, but not for any other type of basis function.

Member AbstractFeVolumeIntegralAssembler< ELEMENT_DIM, SPACE_DIM, PROBLEM_DIM, CAN_ASSEMBLE_VECTOR, CAN_ASSEMBLE_MATRIX, INTERPOLATION_LEVEL >::ComputeTransformedBasisFunctionDerivatives (const ChastePoint< ELEMENT_DIM > &rPoint, const c_matrix< double, ELEMENT_DIM, SPACE_DIM > &rInverseJacobian, c_matrix< double, SPACE_DIM, ELEMENT_DIM+1 > &rReturnValue)

#1319 Template LinearBasisFunction over SPACE_DIM and remove this method?

Class AbstractHdf5Access

: magic number

Member AbstractIsotropicIncompressibleMaterialLaw< DIM >::Get_d2W_dI1 (double I1, double I2)=0

The name of this method should not include underscores.

Member AbstractIsotropicIncompressibleMaterialLaw< DIM >::Get_d2W_dI1I2 (double I1, double I2)=0

The name of this method should not include underscores.

Member AbstractIsotropicIncompressibleMaterialLaw< DIM >::Get_d2W_dI2 (double I1, double I2)=0

The name of this method should not include underscores.

Member AbstractIsotropicIncompressibleMaterialLaw< DIM >::Get_dW_dI1 (double I1, double I2)=0

The name of this method should not include underscores.

Member AbstractIsotropicIncompressibleMaterialLaw< DIM >::Get_dW_dI2 (double I1, double I2)=0

The name of this method should not include underscores.

Member AbstractLookupTableCollection::SetTableProperties (const std::string &rKeyingVariableName, double min, double step, double max)

remove magic number? (#1884)

Member AbstractMesh< ELEMENT_DIM, SPACE_DIM >::CalculateBoundingBox (const std::vector< Node< SPACE_DIM > * > &rNodes) const

#1322 use a const version of NodeIterator here

Class AbstractMeshReader< ELEMENT_DIM, SPACE_DIM >::NodeIterator

#1930. We could roll most iterator functionality into a base class here

Member AbstractNonlinearAssemblerSolverHybrid< ELEMENT_DIM, SPACE_DIM, PROBLEM_DIM >::ComputeJacobianNumerically (const Vec currentGuess, Mat *pJacobian)

This loop is setting the column "global_index_outer" of the Jacobian matrix to the result vector in a non-sparse way.

Member AbstractNonlinearElasticitySolver< DIM >::SetKspSolverAndPcType (KSP solver)

#2057 Make better choices here...

#2057 Make better choices..

Class AbstractOdeSrnModel

#2752 Thoroughly document this class

Member AbstractOdeSrnModel::SimulateToCurrentTime ()

#752 remove this pointless if statement

Member AbstractOdeSystem::rGetConstStateVariables () const

move to AbstractParameterisedSystem? (1540)

Member AbstractPerElementWriter< ELEMENT_DIM, SPACE_DIM, DATA_SIZE >::WriteData (OutputFileHandler &rHandler, const std::string &rFileName)

See if this can be speeded up with #2351.

Class AbstractSrnModel

#2752 Thoroughly document this class (including, for example, what SRN stands for!)

Member AbstractSrnModel::Initialise ()

#2752 remove in favour of copy-constructors

Member AbstractTetrahedralElement< 0, SPACE_DIM >::CalculateNormal ()

should throw?

Member AbstractTetrahedralMesh< ELEMENT_DIM, SPACE_DIM >::CalculateMinMaxEdgeLengths ()

Should be const

Member AbstractTetrahedralMesh< ELEMENT_DIM, SPACE_DIM >::CalculateNodeExchange (std::vector< std::vector< unsigned > > &rNodesToSendPerProcess, std::vector< std::vector< unsigned > > &rNodesToReceivePerProcess)

#2426 This is where we should check that we DO HAVE a Tetrahedral (not Distributed mesh)

Member AbstractTetrahedralMesh< ELEMENT_DIM, SPACE_DIM >::ConstructFromMesh (AbstractTetrahedralMesh< ELEMENT_DIM, SPACE_DIM > &rOtherMesh)

Can we make this const?

Member AbstractTetrahedralMesh< ELEMENT_DIM, SPACE_DIM >::load (Archive &archive, const unsigned int version)

#1199 make this work for everything else...

Member AbstractTetrahedralMeshWriter< ELEMENT_DIM, SPACE_DIM >::WriteFilesUsingMesh (AbstractTetrahedralMesh< ELEMENT_DIM, SPACE_DIM > &rMesh, bool keepOriginalElementIndexing=true)

#1322 Mesh should really be const!

#1322 Mesh should be const

#1322 This should be const too

#1322, This should be const too

Member AbstractTetrahedralMeshWriter< ELEMENT_DIM, SPACE_DIM >::WriteFilesUsingParallelMesh (bool keepOriginalElementIndexing=true)

#2351 Also exclude VTK writer

Member AbstractTwoBodyInteractionForce< ELEMENT_DIM, SPACE_DIM >::AddForceContribution (AbstractCellPopulation< ELEMENT_DIM, SPACE_DIM > &rCellPopulation)

this could be tidied by using the rGetNodePairs for all populations and moving the below calculation into the MutableMesh.

Member ActivationOutputModifier::ProcessSolutionAtTimeStep (double time, Vec solution, unsigned problemDim)

#2570 Add to a longer running test

Member AdhesionPottsUpdateRule< DIM >::mCellBoundaryAdhesionEnergyParameter

provide units

Member AdhesionPottsUpdateRule< DIM >::mCellCellAdhesionEnergyParameter

provide units

Member BidomainProblem< DIM >::AtBeginningOfTimestep (double time)

#1159 #1324 heart/src/problem/AbstractCardiacProblem.hpp:657 expects both pointing at the same place when unarchiving

Member BidomainProblem< DIM >::LoadExtraArchiveForBidomain (Archive &archive, unsigned version)

#1159 sanity check that the contents of p_bcc and mpElectrodes->GetBoundaryConditionsContainer() match.

Class BoundaryConditionsContainer< ELEMENT_DIM, SPACE_DIM, PROBLEM_DIM >

#1321 Various operations are currently very inefficient - there is certainly scope for optimisation here!

Member BoundaryConditionsContainer< ELEMENT_DIM, SPACE_DIM, PROBLEM_DIM >::HasNeumannBoundaryCondition (const BoundaryElement< ELEMENT_DIM-1, SPACE_DIM > *pSurfaceElement, unsigned indexOfUnknown=0)

#1321 This is a horrendously inefficient fix. Perhaps have flag in element object?

Member BoxCollection< DIM >::BoxCollection (double boxWidth, c_vector< double, 2 *DIM > domainSize, bool isPeriodicInX=false, bool isPeriodicInY=false, bool isPeriodicInZ=false)

#2725 example: domain width of 1.0 and box width of 0.25, the following line will create 5 boxes not 4

Class BuskeAdhesiveForce< DIM >

does this mean natural radius of a cell? If so at what age? (#1764) Time is in hours.

Class BuskeCompressionForce< DIM >

does this mean natural radius of a cell? If so at what age? (#1764) Time is in hours.

Member BuskeCompressionForce< DIM >::AddForceContribution (AbstractCellPopulation< DIM > &rCellPopulation)

Doesn't say in the Buske paper how they calculate this, so we need to look at this to be sure it's what we want (#1764)

Class BuskeElasticForce< DIM >

does this mean natural radius of a cell? If so at what age? (#1764) Time is in hours.

Member CaBasedCellPopulation< DIM >::IsSiteAvailable (unsigned index, CellPtr pCell)

Which subclasses? Why is the second input argument needed?

this is where to deal with carrying capacity

Member CaBasedCellPopulation< DIM >::UpdateCellLocations (double dt)

make this sweep random

Member CardiacElectroMechanicsProblem< DIM, ELEC_PROB_DIM >::Initialise ()

This is fragile: check how the TimeStepper does it, and possibly refactor the behaviour there into a static helper method if it isn't already.

Member CardiacElectroMechanicsProblem< DIM, ELEC_PROB_DIM >::WriteWatchedLocationData (double time, Vec voltage)

Improve efficiency of this method?

Member CellBasedPdeHandler< DIM >::CellBasedPdeHandler (AbstractCellPopulation< DIM > *pCellPopulation, bool deleteMemberPointersInDestructor=false)

change to exceptions (#1891)

Member CellBasedPdeHandler< DIM >::SolvePdeAndWriteResultsToFile (unsigned samplingTimestepMultiple)

enable the coarse PDE mesh to change size, e.g. for a growing domain (#630/#1891)

enable this in the case where a coarse PDE mesh is used

Worry about round-off errors (#1891)

Member CellMutationStatesWriter< ELEMENT_DIM, SPACE_DIM >::VisitCell (CellPtr pCell, AbstractCellPopulation< ELEMENT_DIM, SPACE_DIM > *pCellPopulation)

split these all off as cell label not mutation states (see #2534)

Member CellPopulationAdjacencyMatrixWriter< ELEMENT_DIM, SPACE_DIM >::Visit (MeshBasedCellPopulation< ELEMENT_DIM, SPACE_DIM > *pCellPopulation)

#2645 - if efficiency is an issue, check if this is really needed

Member CellPopulationAdjacencyMatrixWriter< ELEMENT_DIM, SPACE_DIM >::VisitAnyPopulation (AbstractCellPopulation< SPACE_DIM, SPACE_DIM > *pCellPopulation)

#2645 - if efficiency is an issue, check if this is really needed

Member CellProliferativeTypesWriter< ELEMENT_DIM, SPACE_DIM >::GetCellDataForVtkOutput (CellPtr pCell, AbstractCellPopulation< ELEMENT_DIM, SPACE_DIM > *pCellPopulation)

: replace this hard-coded 6 with the ApoptoticCellProperty member mColour?

Member CellProliferativeTypesWriter< ELEMENT_DIM, SPACE_DIM >::VisitCell (CellPtr pCell, AbstractCellPopulation< ELEMENT_DIM, SPACE_DIM > *pCellPopulation)

: replace this hard-coded 6 with the ApoptoticCellProperty member mColour? (#2512)

Member CellProperties::CalculateProperties ()

#1495 a horrible magic number but seems to work OK.

Member CmguiMeshWriter< ELEMENT_DIM, SPACE_DIM >::WriteFiles ()

: EXCEPTION maybe...

Member ColumnDataReader::mVariablesToColumns

Change int to unsigned? (#991)

Member CompressibleExponentialLaw< DIM >::ComputeStressAndStressDerivative (c_matrix< double, DIM, DIM > &rC, c_matrix< double, DIM, DIM > &rInvC, double pressure, c_matrix< double, DIM, DIM > &rT, FourthOrderTensor< DIM, DIM, DIM, DIM > &rDTdE, bool computeDTdE)

#2193 This line is to trap for large deformations which lead to blow up in the exponential Uysk model

Member CryptSimulationBoundaryCondition< DIM >::OutputCellPopulationBoundaryConditionParameters (out_stream &rParamsFile)

Can we abstract these XML out methods and do automatic indentation?

Member CylindricalHoneycombVertexMeshGenerator::CylindricalHoneycombVertexMeshGenerator (unsigned numElementsAcross, unsigned numElementsUp, bool isFlatBottom=false, double cellRearrangementThreshold=0.01, double t2Threshold=0.001)

This should be an exception (#2401)

Member DeltaNotchOdeSystem::DeltaNotchOdeSystem (std::vector< double > stateVariables=std::vector< double >())

extract model parameters as member variables

Class DeltaNotchSrnModel

#2752 document this class more thoroughly here

Member DeltaNotchSrnModel::SimulateToCurrentTime ()

#2752 say what it does in this class

Class DifferentialAdhesionGeneralisedLinearSpringForce< ELEMENT_DIM, SPACE_DIM >

#2266 - throw exceptions if using other cell population objects?

#2266 - override CalculateForceBetweenNodes() to use a default rest length of 1.0 for all springs?

Member DifferentialAdhesionPottsUpdateRule< DIM >::mLabelledCellBoundaryAdhesionEnergyParameter

provide units

Member DifferentialAdhesionPottsUpdateRule< DIM >::mLabelledCellCellAdhesionEnergyParameter

provide units

Member DifferentialAdhesionPottsUpdateRule< DIM >::mLabelledCellLabelledCellAdhesionEnergyParameter

provide units

Member DiffusionCaUpdateRule< DIM >::mDiffusionParameter

provide units

Member DistanceMapCalculator< ELEMENT_DIM, SPACE_DIM >::SingleDistance (unsigned sourceNodeIndex, unsigned destinationNodeIndex)

#1414 premature termination when we find the correct one (parallel)

Member DistributedTetrahedralMesh< ELEMENT_DIM, SPACE_DIM >::CalculateMinMaxEdgeLengths ()

Should be const

Member DistributedTetrahedralMesh< ELEMENT_DIM, SPACE_DIM >::ComputeMeshPartitioning (AbstractMeshReader< ELEMENT_DIM, SPACE_DIM > &rMeshReader, std::set< unsigned > &rNodesOwned, std::set< unsigned > &rHaloNodesOwned, std::set< unsigned > &rElementsOwned, std::vector< unsigned > &rProcessorsOffset)

#1293 add a timing event for the partitioning

Member DistributedTetrahedralMesh< ELEMENT_DIM, SPACE_DIM >::ConstructCuboid (unsigned width, unsigned height, unsigned depth)

probably faster to make mesh from scratch.

Member DistributedTetrahedralMesh< ELEMENT_DIM, SPACE_DIM >::ConstructFromMeshReader (AbstractMeshReader< ELEMENT_DIM, SPACE_DIM > &rMeshReader)

#1930 We should use a reader set iterator for this bit now.

#1730 and we should be able to combine ASCII branch

#1930 We should use a reader set iterator for this bit now.

#1289 assert the node is not considered both owned and halo-owned.

Member DistributedTetrahedralMesh< ELEMENT_DIM, SPACE_DIM >::ConstructLinearMesh (unsigned width)

probably faster to make mesh from scratch.

Member DistributedTetrahedralMesh< ELEMENT_DIM, SPACE_DIM >::ConstructRectangularMesh (unsigned width, unsigned height, bool stagger=true)

probably faster to make mesh from scratch.

Member DistributedTetrahedralMesh< ELEMENT_DIM, SPACE_DIM >::HaloNodeIterator

#1494, this iterator needs to be dereferenced twice because it is an STL iterator to a pointer.

Member DynamicModelLoaderRegistry::GetLoader (const std::string &rPath)

#1957 causes segfaults

#1957 remove when unloading working

Member Electrodes< DIM >::SwitchOff (double time)

remove magic number? (#1884)

Member Electrodes< DIM >::SwitchOn (double time)

remove magic number? (#1884)

Member Element< ELEMENT_DIM, SPACE_DIM >::CalculateXi (const ChastePoint< SPACE_DIM > &rTestPoint)

: #1361 ComputeContainingElements and related methods, and methods called by that down to here, should really take in const c_vector& rather than ChastePoints.

#1326 This method shouldn't need a new Jacobian inverse for every Xi

Member ElementAttributes< ELEMENT_DIM, SPACE_DIM >::GetFirstAttribute ()

#2739 This should throw an exception if there are no attributes

#2739 This should throw: EXCEPTION("Attempting to get element attribute when there are none defined");

Member ExponentialMaterialLaw< DIM >::Get_d2W_dI1 (double I1, double I2)

The name of this method should not include underscores.

Member ExponentialMaterialLaw< DIM >::Get_d2W_dI1I2 (double I1, double I2)

The name of this method should not include underscores.

Member ExponentialMaterialLaw< DIM >::Get_d2W_dI2 (double I1, double I2)

The name of this method should not include underscores.

Member ExponentialMaterialLaw< DIM >::Get_dW_dI1 (double I1, double I2)

The name of this method should not include underscores.

Member ExponentialMaterialLaw< DIM >::Get_dW_dI2 (double I1, double I2)

The name of this method should not include underscores.

Member ExtendedBidomainProblem< DIM >::SetFixedExtracellularPotentialNodes (std::vector< unsigned > nodes)

turn this into an exception if the user calls this twice...

Member ExtendedBidomainProblem< DIM >::WriteOneStep (double time, Vec voltageVec)

write a specific method for this class

Member ExtendedBidomainSolver< ELEM_DIM, SPACE_DIM >::SetupLinearSystem (Vec currentSolution, bool computeMatrix)

turn these into exceptions somewhere else

Member FarhadifarForce< DIM >::AddForceContribution (AbstractCellPopulation< DIM > &rCellPopulation)

: check whether this line influences profiling tests - if so, we should remove it.

Class FarhadifarTypeModifier< DIM >

Consider renaming as FarhadifarTargetAreaModifier for clarity

Member FarhadifarTypeModifier< DIM >::UpdateTargetAreaOfCell (const CellPtr pCell)

: which cells are apoptotic? if they get apoptotic during G2-phase then this line has to be changed

This is a little hack that we might want to clean up in the future.

Member FineCoarseMeshPair< DIM >::ComputeCoarseElementForGivenPoint (ChastePoint< DIM > &rPoint, bool safeMode, unsigned boxForThisPoint)

: could possibly merge with ComputeFineElementAndWeightForGivenPoint(). Differences between the methods are: the other method uses fine mesh and fine mesh box, computes weights as well (and sets the element and weight in the vec), rather than returning the element, and that method saves information in mStatisticsCounters.

Member FineCoarseMeshPair< DIM >::ComputeFineElementAndWeightForGivenPoint (ChastePoint< DIM > &rPoint, bool safeMode, unsigned boxForThisPoint, unsigned index)

: could possibly merge with ComputeCoarseElementForGivenPoint(). Difference between the methods are: this uses fine mesh and fine mesh box, computes weights as well (and sets the element and weight in the vec), rather than returning the element, and this method saves information in mStatisticsCounters.

Member for (i=STARTINDEX;i< argc;i++)

Horrible hack! (#1076/#1377)

Store orientations? (#1076/#1377)

Member GeneralPlaneStimulusCellFactory< CELL, ELEMENT_DIM, SPACE_DIM >::GeneralPlaneStimulusCellFactory (unsigned numEleAcross, double meshWidth, bool useMeshWidthAsMag=false, double stimulusMagnitude=-1e7, double stimulusDuration=0.5)

The useMeshWidth is temporary, while we are sorting out 3D stimulus. It is to be removed later (along with StimulusConvergenceTester) scale stimulus depending on space_step of elements

It looks like the value of the stimulus is specific to 3D

Member Goldbeter1991OdeSystem::Goldbeter1991OdeSystem (std::vector< double > stateVariables=std::vector< double >())

extract model parameters as member variables

Class Goldbeter1991SrnModel

#2752 give reference for this ODE system

Member Goldbeter1991SrnModel::SimulateToCurrentTime ()

#2752 say what it does in this class

Class Hdf5DataReader

Add to documentation whether we can call this in serial/parallel, whether we can call it when file is open already etc...

Member Hdf5DataWriter::Hdf5DataWriter (DistributedVectorFactory &rVectorFactory, const std::string &rDirectory, const std::string &rBaseName, bool cleanDirectory=true, bool extendData=false, std::string datasetName="Data")

1300 We can't set mDataFixedDimensionSize, because the information isn't in the input file. This means that checking the size of input vectors in PutVector and PutStripedVector is impossible.

Member Hdf5ToCmguiConverter< ELEMENT_DIM, SPACE_DIM >::Hdf5ToCmguiConverter (const FileFinder &rInputDirectory, const std::string &rFileBaseName, AbstractTetrahedralMesh< ELEMENT_DIM, SPACE_DIM > *pMesh, bool hasBath=false, unsigned precision=0u)

#1660 at present this converter is hardcoded to work with "Data" using the below statement

What if the mesh has been scaled, translated or rotated?

Member Hdf5ToMeshalyzerConverter< ELEMENT_DIM, SPACE_DIM >::Hdf5ToMeshalyzerConverter (const FileFinder &rInputDirectory, const std::string &rFileBaseName, AbstractTetrahedralMesh< ELEMENT_DIM, SPACE_DIM > *pMesh, bool usingOriginalNodeOrdering, unsigned precision=0)

What if the mesh has been scaled, translated or rotated?

Member Hdf5ToVtkConverter< ELEMENT_DIM, SPACE_DIM >::Hdf5ToVtkConverter (const FileFinder &rInputDirectory, const std::string &rFileBaseName, AbstractTetrahedralMesh< ELEMENT_DIM, SPACE_DIM > *pMesh, bool parallelVtk, bool usingOriginalNodeOrdering)

What if the mesh has been scaled, translated or rotated?

Member Hdf5ToXdmfConverter< ELEMENT_DIM, SPACE_DIM >::AddDataOnNodes (XERCES_CPP_NAMESPACE_QUALIFIER DOMElement *pGridElement, XERCES_CPP_NAMESPACE_QUALIFIER DOMDocument *pDomDocument, unsigned timeStep)

#1157 Make this work in parallel

Member HeartConfig::GetCellHeterogeneities (std::vector< boost::shared_ptr< AbstractChasteRegion< DIM > > > &rCellHeterogeneityRegions, std::vector< double > &rScaleFactorGks, std::vector< double > &rScaleFactorIto, std::vector< double > &rScaleFactorGkr, std::vector< std::map< std::string, double > > *pParameterSettings)

- do we assume the vectors are initially empty?

There is no set method

Member HeartConfig::GetConductivityHeterogeneities (std::vector< boost::shared_ptr< AbstractChasteRegion< DIM > > > &conductivitiesHeterogeneityAreas, std::vector< c_vector< double, 3 > > &intraConductivities, std::vector< c_vector< double, 3 > > &extraConductivities) const

- do we assume the vectors are initially empty?

When this is implemented, then we require an example in ChasteParametersFullFormat.xml

Member HeartConfig::GetIonicModelRegions (std::vector< boost::shared_ptr< AbstractChasteRegion< DIM > > > &rDefinedRegions, std::vector< cp::ionic_model_selection_type > &rIonicModels) const

When this is implemented, then we require an example in ChasteParametersFullFormat.xml

Member HeartConfig::GetStimuli (std::vector< boost::shared_ptr< AbstractStimulusFunction > > &rStimuliApplied, std::vector< boost::shared_ptr< AbstractChasteRegion< DIM > > > &rStimulatedAreas) const

- do we assume the vectors are initially empty?

There is no set method

Member HeartConfig::HeartConfig ()

#1703 This defaults should be set in HeartConfigDefaults.hpp

Member HeartConfig::SetBathConductivity (double bathConductivity)

Is this used anywhere?

Member HeartConfig::SetBathMultipleConductivities (std::map< unsigned, double > bathConductivities)

: This implementation is temporary until we incorporate the bath heterogeneities to the XML schema

Member HeartConfig::SetMeshFileName (std::string meshPrefix, cp::media_type fibreDefinition=cp::media_type::NoFibreOrientation)

There is no Get method

Member HeartConfig::SetSurfaceAreaToVolumeRatio (double ratio)

#1703 Think about adding this convenience method either copying the existing BathIds, resetting them out of the way, or making them empty...

Member HeartGeometryInformation< SPACE_DIM >::LEFT_VENTRICLE_WALL

#1703 Perhaps add these constants to HeartConfig...

Member HeterotypicBoundaryLengthWriter< ELEMENT_DIM, SPACE_DIM >::Visit (MeshBasedCellPopulation< ELEMENT_DIM, SPACE_DIM > *pCellPopulation)

#2273 - check if this call is needed

#2273 - check we have correctly dealt with ghost nodes

Member HeterotypicBoundaryLengthWriter< ELEMENT_DIM, SPACE_DIM >::Visit (NodeBasedCellPopulation< SPACE_DIM > *pCellPopulation)

#2273 - check if this call to Update() is needed

Member HeterotypicBoundaryLengthWriter< ELEMENT_DIM, SPACE_DIM >::Visit (PottsBasedCellPopulation< SPACE_DIM > *pCellPopulation)

#2273 - investigate whether there is a hard-coded assumption that neighbouring nodes in Potts simulations are unit distance apart

Member HeterotypicBoundaryLengthWriter< ELEMENT_DIM, SPACE_DIM >::Visit (VertexBasedCellPopulation< SPACE_DIM > *pCellPopulation)

#2273 - check if this call to Update() is needed

Member IncompressibleNonlinearElasticitySolver< DIM >::FormInitialGuess ()

#2223 This is unlikely to work using DistributedQuadraticMesh with Non-homogeneous material laws

Member LinearSystem::LinearSystem (PetscInt lhsVectorSize, unsigned rowPreallocation=UINT_MAX)

: if we create a linear system object outside a cardiac solver, these are gonna be the default solver and preconditioner. Not consitent with ChasteDefaults.xml though...

Member LinearSystem::LinearSystem (Vec templateVector, unsigned rowPreallocation, bool newAllocationError=true)

: if we create a linear system object outside a cardiac solver, these are gonna be the default solver and preconditioner. Not consistent with ChasteDefaults.xml though...

Member LinearSystem::LinearSystem (Vec residualVector, Mat jacobianMatrix)

: if we create a linear system object outside a cardiac solver, these are gonna be the default solver and preconditioner. Not consitent with ChasteDefaults.xml though...

Member LinearSystem::mOwnershipRangeLo

Verify claim that ownership range for Vec and Mat is same. This should only matter for efficiency if the claim is false.

Member LinearSystem::mpBlockDiagonalPC

: #1082 Create an abstract class for the preconditioners and use a single pointer

Member LinearSystem::ResetKspSolver ()

#1695 Store this number in a member variable.

Member LinearSystem::SetMatrixIsSymmetric (bool isSymmetric=true)

: shall we allow modifying the symmetry flag anytime?

Member LinearSystem::SetPcType (const char *pcType, boost::shared_ptr< std::vector< PetscInt > > pBathNodes=boost::shared_ptr< std::vector< PetscInt > >())

: #1082 is this the way of defining a null pointer as the default value of pBathNodes?

: #1082 use a single pointer to abstract class

: #1082 use a single pointer to abstract class

: #1082 use a single pointer to abstract class

Member LinearSystem::Solve (Vec lhsGuess=NULL)

This is a magic number. Do we want a warning here?

Should it be compulsory for the caller to supply this and manage the memory?

#1695 Store this number in a member variable.

Member LinearSystem::~LinearSystem ()

Never tested in linalg component

Member MeshBasedCellPopulation< ELEMENT_DIM, SPACE_DIM >::CreateVoronoiTessellation ()

#1374.

Member MeshBasedCellPopulation< ELEMENT_DIM, SPACE_DIM >::GetVolumeOfVoronoiElement (unsigned index)

This method is somewhat redundant following the introduction of the method GetVolumeOfCell() (see #1985).

Member MeshBasedCellPopulation< ELEMENT_DIM, SPACE_DIM >::Update (bool hasHadBirthsOrDeaths=true)

check if there is a more efficient way of keeping track of node velocity information (#2404)

There may be a better way of checking if node radii are set (#2694)

Member MeshBasedCellPopulationWithGhostNodes< DIM >::WriteVtkResultsToFile (const std::string &rDirectory)

#1975 - deal with possibility of information stored in CellData

Class MeshEventHandler

Temporary for #2351

Member MooneyRivlinMaterialLaw< DIM >::Get_d2W_dI1 (double I1, double I2)

The name of this method should not include underscores.

Member MooneyRivlinMaterialLaw< DIM >::Get_d2W_dI1I2 (double I1, double I2)

The name of this method should not include underscores.

Member MooneyRivlinMaterialLaw< DIM >::Get_d2W_dI2 (double I1, double I2)

The name of this method should not include underscores.

Member MooneyRivlinMaterialLaw< DIM >::Get_dW_dI1 (double I1, double I2)

The name of this method should not include underscores.

Member MooneyRivlinMaterialLaw< DIM >::Get_dW_dI2 (double I1, double I2)

The name of this method should not include underscores.

Member MutableMesh< ELEMENT_DIM, SPACE_DIM >::CheckIsVoronoi (double maxPenetration=0.0)

use ElementIterator here?

Member MutableMesh< ELEMENT_DIM, SPACE_DIM >::RescaleMeshFromBoundaryNode (ChastePoint< 1 > updatedPoint, unsigned boundaryNodeIndex)

should unsigned GetNumBoundaryNodes() be overloaded too??

Member MutableMesh< ELEMENT_DIM, SPACE_DIM >::SplitLongEdges (double cutoffLength)

use iterators to tidy this up

Member MutableVertexMesh< ELEMENT_DIM, SPACE_DIM >::CheckForIntersections ()

Change to only loop over neighbouring elements (see #2401)

Member MutableVertexMesh< ELEMENT_DIM, SPACE_DIM >::CheckForSwapsFromShortEdges ()

Could we search more efficiently by just iterating over edges? (see #2401)

Use iterators to tidy this up (see #2401)

Member MutableVertexMesh< ELEMENT_DIM, SPACE_DIM >::CheckForT2Swaps (VertexElementMap &rElementMap)

: cover this line in a test

Member MutableVertexMesh< ELEMENT_DIM, SPACE_DIM >::DivideElement (VertexElement< ELEMENT_DIM, SPACE_DIM > *pElement, unsigned nodeAIndex, unsigned nodeBIndex, bool placeOriginalElementBelow=false)

This method currently assumes SPACE_DIM = 2 (see #866)

this could be more efficient (see #2401)

Member MutableVertexMesh< ELEMENT_DIM, SPACE_DIM >::DivideElementAlongGivenAxis (VertexElement< ELEMENT_DIM, SPACE_DIM > *pElement, c_vector< double, SPACE_DIM > axisOfDivision, bool placeOriginalElementBelow=false)

or should we move a and b apart, it may interfere with neighbouring edges? (see #1399 and #2401)

Member MutableVertexMesh< ELEMENT_DIM, SPACE_DIM >::IdentifySwapType (Node< SPACE_DIM > *pNodeA, Node< SPACE_DIM > *pNodeB)

: consider removing the checking for this exception (see #2401)

Member MutableVertexMesh< ELEMENT_DIM, SPACE_DIM >::PerformT1Swap (Node< SPACE_DIM > *pNodeA, Node< SPACE_DIM > *pNodeB, std::set< unsigned > &rElementsContainingNodes)

remove magic number? (see #1884 and #2401)

Member MutableVertexMesh< ELEMENT_DIM, SPACE_DIM >::PerformT3Swap (Node< SPACE_DIM > *pNode, unsigned elementIndex)

the intersection location is sometimes overwritten when WidenEdgeOrCorrectIntersectionLocationIfNecessary

Member MutableVertexMesh< ELEMENT_DIM, SPACE_DIM >::ReMesh (VertexElementMap &rElementMap)

Implement ReMesh() in 3D (see #1422)

Member MutableVertexMesh< ELEMENT_DIM, SPACE_DIM >::ReMesh ()

This method seems to be redundant; remove it? (#2401)

Member MutableVertexMesh< ELEMENT_DIM, SPACE_DIM >::serialize (Archive &archive, const unsigned int version)

: maybe we should archive the mLocationsOfT1Swaps and mDeletedNodeIndices etc. as well?

Member MutableVertexMesh< ELEMENT_DIM, SPACE_DIM >::WidenEdgeOrCorrectIntersectionLocationIfNecessary (unsigned indexA, unsigned indexB, c_vector< double, 2 > intersection)

investigate if moving A and B causes other issues with nearby nodes (see #2401)

currently this assumes a worst case scenario of 3 nodes between A and B could be less movement for other cases (see #1399 and #2401)

currently this assumes a worst case scenario of 3 nodes between A and B; could be less movement for other cases (see #2401)

Member NodeBasedCellPopulation< DIM >::UpdateMapsAfterRemesh (NodeMap &map)

we want to make mCellLocationMap private - we need to find a better way of doing this

Member NodePartitioner< ELEMENT_DIM, SPACE_DIM >::MetisLibraryPartitioning (AbstractMeshReader< ELEMENT_DIM, SPACE_DIM > &rMeshReader, std::vector< unsigned > &rNodePermutation, std::set< unsigned > &rNodesOwned, std::vector< unsigned > &rProcessorsOffset)

#2250 Direct calls to METIS are to be deprecated

Member NodePartitioner< ELEMENT_DIM, SPACE_DIM >::PetscMatrixPartitioning (AbstractMeshReader< ELEMENT_DIM, SPACE_DIM > &rMeshReader, std::vector< unsigned > &rNodePermutation, std::set< unsigned > &rNodesOwned, std::vector< unsigned > &rProcessorsOffset)

#1216 change the number 54 below (row nonzero allocation) to be nonmagic

: This assembly is likely to generate many communications. Try to interleave other operations by executing them between Begin() and End().

Class NodeVelocityWriter< ELEMENT_DIM, SPACE_DIM >

some code duplication in methods; potential for refactoring (#2404)

Member NodeVelocityWriter< ELEMENT_DIM, SPACE_DIM >::Visit (MeshBasedCellPopulation< ELEMENT_DIM, SPACE_DIM > *pCellPopulation)

correct time step? (#2404)

Member NodeVelocityWriter< ELEMENT_DIM, SPACE_DIM >::Visit (NodeBasedCellPopulation< SPACE_DIM > *pCellPopulation)

correct time step? (#2404)

Member NodeVelocityWriter< ELEMENT_DIM, SPACE_DIM >::Visit (VertexBasedCellPopulation< SPACE_DIM > *pCellPopulation)

correct time step? (#2404)

Member OdeSystemInformation< ODE_SYSTEM >::mpInstance

see if using weak_ptr would work and give funkier semantics (automatically destroy the singleton when no ODE systems were using it)

Member OffLatticeSimulation< ELEMENT_DIM, SPACE_DIM >::CalculateCellDivisionVector (CellPtr pParentCell)

#2400 Could remove this dynamic_cast by moving the code block below into AbstractCentreBasedCellPopulation::AddCell(), allowing it to be overruled by this method when overridden in subclasses. See also comment on #1093.

Member OffLatticeSimulation< ELEMENT_DIM, SPACE_DIM >::WriteVisualizerSetupFile ()

Check whether this comment is still valid

Member OnLatticeSimulation< DIM >::CalculateCellDivisionVector (CellPtr pParentCell)

do something for Potts models here

Member OnLatticeSimulation< DIM >::UpdateCellPopulation ()

#2066 This code should be covered by cell_based/test/simulation/TestOnLatticeSimulationWithCaBasedCellPopulation.hpp TestLoad

Class pack< void(T)>

Check if we need this on Boost>=1.38. Even if it's not needed there, we might still need it to load earlier archives.

Member ParallelColumnDataWriter::PutVectorStripe (int variableId, DistributedVector::Stripe &rStripe)

allow this to be a const-reference

Member PCLDUFactorisation::PCLDUFactorisationContext::PC_amg_A11

- don't create this every iteration but save it first time is needed.

Member PCLDUFactorisation::PCLDUFactorisationContext::PC_amg_A22

- don't create this every iteration but save it first time is needed.

Class PCTwoLevelsBlockDiagonal

: #1082 update this description

Member PCTwoLevelsBlockDiagonal::PCTwoLevelsBlockDiagonalCreate (KSP &rKspObject, std::vector< PetscInt > &rBathNodes)

: #1082 won't work in parallel

: #1082 won't work in parallel

: #1082 assert size(x1) = size(x21) + size(x22)

: #1082 legacy, no need to use the references

: #1082 OK in parallel. Use as an example for the other two blocks

Class PdeSimulationTime

Integrate with other time stepping classes or remove? A small convenience class providing a consistent global time to the PDE solver classes.

Member PetscTools::ReadPetscObject (Mat &rMat, const std::string &rOutputFileFullPath, Vec rParallelLayout=NULL)

: #1082 work out appropriate nz allocation.

Member PlaneBoundaryCondition< ELEMENT_DIM, SPACE_DIM >::ImposeBoundaryCondition (const std::map< Node< SPACE_DIM > *, c_vector< double, SPACE_DIM > > &rOldLocations)

Move this to constructor. If this is in the constructor then Exception always throws.

Member PlaneStimulusCellFactory< CELL, ELEMENT_DIM, SPACE_DIM >::CreateCardiacCellForTissueNode (Node< SPACE_DIM > *pNode)

remove magic number? (#1884)

Member PolynomialMaterialLaw3d::Get_d2W_dI1 (double I1, double I2)

The name of this method should not include underscores.

Member PolynomialMaterialLaw3d::Get_d2W_dI1I2 (double I1, double I2)

The name of this method should not include underscores.

Member PolynomialMaterialLaw3d::Get_d2W_dI2 (double I1, double I2)

The name of this method should not include underscores.

Member PolynomialMaterialLaw3d::Get_dW_dI1 (double I1, double I2)

The name of this method should not include underscores.

Member PolynomialMaterialLaw3d::Get_dW_dI2 (double I1, double I2)

The name of this method should not include underscores.

Member PostProcessingWriter< ELEMENT_DIM, SPACE_DIM >::WriteAboveThresholdDepolarisationFile (double threshold)

This method ought to be private and called by the WritePostProcessingFiles method if the user requests for it. This will be possible after modifying the schema and specifying Get and Set methods in HeartConfig to check whether the user wants this file or not

Member PostProcessingWriter< ELEMENT_DIM, SPACE_DIM >::WritePostProcessingFiles ()

#2359 work out how to get rid of this line needed because PseudoEcgCalculator makes its own Hdf5DataReader.

#2359 work out how to get rid of these lines

Member PottsBasedCellPopulation< DIM >::CreateElementTessellation ()

implement this method (#1666)

Member PottsBasedCellPopulation< DIM >::UpdateCellLocations (double dt)

If this causes the element to have no nodes then flag the element and cell to be deleted

Member PottsMesh< DIM >::DivideElement (PottsElement< DIM > *pElement, bool placeOriginalElementBelow=false)

this could be more efficient

Member PottsMesh< DIM >::GetCentroidOfElement (unsigned index)

This should probably be returning the nearest node

Member PottsMesh< DIM >::GetSurfaceAreaOfElement (unsigned index)

not implemented in 3d yet

Class PottsMesh< DIM >::PottsElementIterator

This is the same as in AbstractTetrahedralMesh and VertexMesh- merge? (#1379)

Member PottsMeshReader< SPACE_DIM >::GetNextFaceData ()

Implement this method (#1663, #1377)

Member PottsMeshReader< SPACE_DIM >::GetNumFaces () const

Implement this method (#1663)

Member PottsMeshWriter< DIM >::WriteFilesUsingMesh (PottsMesh< SPACE_DIM > &rMesh)

Mesh should be const (#1076)

Mesh should be const (#1663)

Member PropagationPropertiesCalculator::CalculateAllConductionVelocities (unsigned globalNearNodeIndex, unsigned globalFarNodeIndex, const double euclideanDistance)

remove magic number? (#1884)

Member PropagationPropertiesCalculator::CalculateConductionVelocity (unsigned globalNearNodeIndex, unsigned globalFarNodeIndex, const double euclideanDistance)

remove magic number? (#1884)

Member QuadraticMeshHelper< DIM >::AddNodesToBoundaryElements (AbstractTetrahedralMesh< DIM, DIM > *pMesh, AbstractMeshReader< DIM, DIM > *pMeshReader)

#1930 Until there is an interator_facade over boundary elements,

#1930 Once there is an interator_facade then we can do: elem_index = pMeshReader->GetFaceData(face_index).ContainingElement;

Member QuadraticMeshHelper< DIM >::HelperMethod1 (unsigned boundaryElemNode0, unsigned boundaryElemNode1, Element< DIM, DIM > *pElement, unsigned node0, unsigned node1, unsigned node2, unsigned &rOffset, bool &rReverse)

document these parameters

Member QuadraticMeshHelper< DIM >::HelperMethod2 (AbstractTetrahedralMesh< DIM, DIM > *pMesh, BoundaryElement< DIM-1, DIM > *pBoundaryElement, Element< DIM, DIM > *pElement, unsigned internalNode0, unsigned internalNode1, unsigned internalNode2, unsigned offset, bool reverse)

document these parameters

Member RandomCaSwitchingUpdateRule< DIM >::mSwitchingParameter

provide units

Class SimpleTargetAreaModifier< DIM >

Improve class documentation by describing precisely how the target area depends on the cell's status

Member SimpleTargetAreaModifier< DIM >::UpdateTargetAreaOfCell (const CellPtr pCell)

This is a little hack that we might want to clean up in the future.

Member StressPerElementWriter< DIM >::Visit (Element< DIM, DIM > *pElement, unsigned localIndex, c_vector< double, DIM *DIM > &rData)

#2223 Note that the localIndex is intended for DistributedQuadraticMesh, but we might need a map instead. For now, make sure that it's not a distributed mesh i.e. GetNumLocalElements == GetNumElements and the indexing is always global

Member SurfaceAreaConstraintPottsUpdateRule< DIM >::mDeformationEnergyParameter

provide units

Member SurfaceAreaConstraintPottsUpdateRule< DIM >::mMatureCellTargetSurfaceArea

provide units #1829 Non-dimensional target surface area of a mature (fully-grown) cell, given in units of area of lattice site. Set to the default value 16 in the constructor.

Member SurfaceAreaConstraintPottsUpdateRule< DIM >::SurfaceAreaConstraintPottsUpdateRule ()

Default values don't apply in 3D.

Member TetrahedralMesh< ELEMENT_DIM, SPACE_DIM >::ImportFromMesher (MESHER_IO &mesherOutput, unsigned numberOfElements, int *elementList, unsigned numberOfFaces, int *faceList, int *edgeMarkerList)

#1545: (or add arguments ...)

Member ToroidalHoneycombVertexMeshGenerator::ToroidalHoneycombVertexMeshGenerator (unsigned numElementsAcross, unsigned numElementsUp, double cellRearrangementThreshold=0.01, double t2Threshold=0.001)

This should be an exception

This should be an exception

Member TrianglesMeshReader< ELEMENT_DIM, SPACE_DIM >::OpenNodeFile ()

Change name to OpenNodesFile for consistency with OpenElementsFile and OpenFacesFile? (#991)

Member TrianglesMeshReader< ELEMENT_DIM, SPACE_DIM >::SetNodePermutation (std::vector< unsigned > &rPermutationVector)

#2452 We need a way of propagating this back to the mesh (and insuring that the mesh is NOT being re-partitioned)

Member TrianglesMeshWriter< ELEMENT_DIM, SPACE_DIM >::WriteFiles ()

#1949 Readers do not currently support reading of node attributes, so we cannot yet write them from a reader

#1949

#1949 Readers do not currently support reading of node attributes, so we cannot yet write them from a reader

#1949 Will deadlock on GetNode(global ID) in parallel since this code is run on the master process

#1949

#1949

Member VertexBasedCellPopulation< SPACE_DIM >::GetTetrahedralMeshUsingVertexMesh ()

will the nodes in mpMutableVertexMesh always have indices 0,1,2,...? (#2221)

Member VertexBasedCellPopulation< SPACE_DIM >::RemoveDeadCells ()

(#2489) this should cause an error - we should fix this!

Member VertexBasedCellPopulation< SPACE_DIM >::Update (bool hasHadBirthsOrDeaths=true)

We want to make these maps private, so we need a better way of doing the code below.

Member VertexMesh< ELEMENT_DIM, SPACE_DIM >::ElementIncludesPoint (const c_vector< double, SPACE_DIM > &rTestPoint, unsigned elementIndex)

(see #2387 and #2401) Investigate why the commented implementation causes Test2DVertexBasedCryptRepresentativeSimulation to fail

Member VertexMesh< ELEMENT_DIM, SPACE_DIM >::GetCentroidOfElement (unsigned index)

compute centroid rather than centre of mass (see #1422)

Member VertexMesh< ELEMENT_DIM, SPACE_DIM >::GetShortAxisOfElement (unsigned index)

remove magic number? (see #1884 and #2401)

Member VertexMesh< ELEMENT_DIM, SPACE_DIM >::SolveBoundaryElementMapping (unsigned index) const

sort out boundary elements in a vertex mesh (#1263)

Class VertexMesh< ELEMENT_DIM, SPACE_DIM >::VertexElementIterator

This is the same as in AbstractTetrahedralMesh and PottsMesh - merge? (#1379)

Member VertexMesh< ELEMENT_DIM, SPACE_DIM >::VertexMesh (TetrahedralMesh< 3, 3 > &rMesh)

Merge with 2D Voronoi constructor? (see #1075)

Member VertexMesh< ELEMENT_DIM, SPACE_DIM >::VertexMesh (TetrahedralMesh< 2, 2 > &rMesh, bool isPeriodic=false)

Merge with 3D Voronoi constructor? (see #1075)

Member VertexMeshReader< ELEMENT_DIM, SPACE_DIM >::GetNextElementDataWithFaces ()

Store face orientations? (#1076/#1377)

Member VertexMeshReader< ELEMENT_DIM, SPACE_DIM >::GetNextFaceData ()

Implement this method (#1076, #1377)

Member VertexMeshReader< ELEMENT_DIM, SPACE_DIM >::GetNumEdges () const

Implement this method (#1076)

Member VertexMeshReader< ELEMENT_DIM, SPACE_DIM >::GetNumFaces () const

Implement this method (#1076)

Member VertexMeshWriter< ELEMENT_DIM, SPACE_DIM >::GetNextElement ()

Assert this method should only be called in 2D? (#1076/#1377)

Member VertexMeshWriter< ELEMENT_DIM, SPACE_DIM >::GetNextElementWithFaces ()

Store face orientations? (#1076/#1377)

Member VertexMeshWriter< ELEMENT_DIM, SPACE_DIM >::mpVtkUnstructedMesh

Merge into VtkMeshWriter (#1076)

Member VertexMeshWriter< ELEMENT_DIM, SPACE_DIM >::WriteFiles ()

Store face orientations? (#1076/#1377)

Member VertexMeshWriter< ELEMENT_DIM, SPACE_DIM >::WriteFilesUsingMesh (VertexMesh< ELEMENT_DIM, SPACE_DIM > &rMesh)

Mesh should be const (#1076)

Mesh should be const (#1076)

Member VolumeConstraintPottsUpdateRule< DIM >::mDeformationEnergyParameter

provide units

Member VolumeConstraintPottsUpdateRule< DIM >::VolumeConstraintPottsUpdateRule ()

Default values don't apply in 3D.

Member VolumeTrackingModifier< DIM >::UpdateCellData (AbstractCellPopulation< DIM, DIM > &rCellPopulation)

work out how to properly fix this (#1986)

Member VtkMeshWriter< ELEMENT_DIM, SPACE_DIM >::MakeVtkMesh ()

#2351 Temporary workaround for parallel writer

Member VtkMeshWriter< ELEMENT_DIM, SPACE_DIM >::WriteFilesUsingMesh (AbstractTetrahedralMesh< ELEMENT_DIM, SPACE_DIM > &rMesh, bool keepOriginalElementIndexing=true)

#1322 Mesh should really be const!

#1322 Mesh should be const

This ought to look exactly like the other MakeVtkMesh

#1494 Do we need a barrier?